General Specifications | |
Model | Mahindra 4025 |
Length | 2WD: 2,920 mm (115 in) 4WD: 3,270 mm (129 in) |
Width | 2WD: 1,760 mm (69.3 in) 4WD: 2,280 mm (90 in) |
Height | – |
Wheel base | – |
Weight | 2WD: 1,990 kg (4,387 lbs) 4WD: 2,245 kg (4,950 lbs) |
Fuel tank capacity | 55.0 liters (14.5 US gal.; 12.1 Imp. gal) |
Battery | 12V, 96Ah |
Cabin type | Open operator station with two-post ROPS |
Engine | |
Engine model | Mahindra MDI 2700R2 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 2.7 L, 2,732 cm2, (166.7 cu·in) |
Bore and stroke | 89.0 mm X 110.0 mm (3.5 in X 4.33 in) |
Compression ratio | 19.5:1 |
Horsepower | 41.6 PS (30.6 kW; 41.0 HP) at 2,300 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Dry disc |
Transmission model | – |
Transmission type | Sliding mesh |
Gears | 8 forward and 2 reverse |
Tires | |
Front tires | Ag: 6×16 (2WD), 9.5×16 (4WD) Industrial: 12.x16.5 (4WD) |
Rear tires | Ag: 12.4×28 Industrial: 16.9×24 (4WD) |
Three-Point Hitch | |
Caterogy | II/I |
Control type | Position and draft control |
Lift capacity | 1,600 kg (3,528 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live with 2-stage clutch |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 0 or 1 |
Total flow | 8.3 gpm (31.4 lpm) |
Steering flow | 4.8 gpm (18.2 lpm) |